Reduction ratio: The input speed of the 36mm planetary gearbox wholesale is higher than the output speed.

Average lifespan: refers to the continuous working time of the reducer at the maximum input speed under rated load.

Full load efficiency: The transmission efficiency of the disc planetary reducer under maximum load conditions (when the output torque stops due to a fault).

Lubrication method: No lubrication required. The reducer is fully sealed, so no lubricating grease needs to be added throughout its entire service life.

Noise: The unit is decibels (dB). This value is measured when the input speed is 3000 revolutions per minute, without load, and at a distance of one meter from the reducer.

Rated torque: A standard for a 36mm planetary gearbox wholesale disc. At this value, the lifespan of the reducer is the average lifespan when the output speed is 100 revolutions per minute. Beyond this value, the average lifespan of the reducer will decrease. When the output torque exceeds twice the value, the gearbox malfunctions.

Grade: The number of sets of planetary gears. Due to the inability of one set of planetary gears to meet larger transmission ratios, sometimes two or three sets are needed to meet users' requirements for larger transmission ratios. Due to the increase in the number of planetary gears, the length of the second or third gear reduction stages will increase, resulting in a decrease in efficiency.

Return clearance: When the output end is fixed and the input end rotates clockwise and counterclockwise to generate a rated torque of+-2% at the output end, there is a slight angular displacement at the input end of the disc planetary reducer, which is the return clearance. The unit is "fen", which is one sixtieth of one degree. The return clearance values given refer to the output end of the reducer.

36mm planetary gearbox wholesale https://www.dydzmotor.com/36mm-planetary-gearbox.html